Thursday, August 2, 2012

Kernel by Shkerzy

Shkerzy, user from 4pda, also on modification and optimization kernel for Alcatel 990
and you can try his build

Added:
 1. OV to max freq 864
 2. BFS
 3. BFQ,SIO,VR
 4. Update to 35.14
 5. Preempt Tiny RCU

Shkerzy_kernel

19 comments:

  1. Replies
    1. Sorry, but it for Gingerbread to...

      I'm test it now on stock 2.3.4 and works fine,only when I listen online radio and surf the stock browser,were small lags

      Delete
  2. hello apology as installed, is for the recovery. I did and just restart the terminal, had installed ewra2 (h)

    ReplyDelete
  3. HELPPPP !!!

    i just install it on marina rom (i use SetCpu) and when i set freq. 806,825, OR 864 suddenly my phone gets stuck and have to move the battery !

    please help as fast as possible !

    ReplyDelete
    Replies
    1. Not all OT990 can working on freq. 806, 825 or 864. My phone work normally on freq 806, but on 825 or higher gets stuck and reboot.

      Delete
    2. But if i install stock rom and install this kernel,will that work ?

      Delete
    3. Yes,that will work, if you install stock 2.3.4 rom

      Delete
  4. My recommendation dont overclock more than 691 mhz the rest 768 , 806, 825, 864 make my phone heat too much and then it
    freezes or resets.

    ReplyDelete
  5. Need help guys, after I upgraded to EWRA and the accompanied Kernel at http://x-ewra.blogspot.com/2012/05/ewra-02-h.html, I rebooted to recovery, (clockworkmod), then I selected restore data. It then freezes during boot. So i rebooted to my backup which I also created through clockworkmod. My phone still started with the ICS look from Holo but gets a lot of error message like several processes stopped running so I restarted again, to see the same thing again. Then I tried to do factory reset (turning the phone off and turning it on with the VOL up button pressed), it now hangs forever with a black screen after the Alcatel one touch screen...

    ReplyDelete
  6. Guys can this problem be fixed through
    some scripts or kernel coz i really need this

    max frequency ...answer plsss

    ReplyDelete
  7. Thumbs Up to Shkerzy for creating this excellent kernel!My phone can run its full power(864mhz).I hope will be released an 1ghz version.

    ReplyDelete
  8. Hey. Can I install this kernel with the QME Rom ? Thx all.

    ReplyDelete
  9. Why ewra rom cant install text to speech data? voice search sucks

    ReplyDelete
  10. Why Marina doesn't accept adreno 200 libs ?

    ReplyDelete
  11. This comment has been removed by the author.

    ReplyDelete
  12. http://forum.xda-developers.com/showthread.php?t=1539281

    Flash via recovery !

    ReplyDelete
  13. SD Card problems = FAT32 partition (used with ext2 and link2sd) dont work to often.

    ReplyDelete