Friday, May 3, 2013

CyanogenMod 7 20130503


- Camera make normall photo/video
- Working FM (@tuxtard)
- Enable routing audio to BT headset
- Add correct MMS profile
- Autobrightness is work:
-- Autobrightness work only when enable "Light sensor filter" and "Allow light decrease" in "CyanogenMod settings" - "Display" - "Automatic backlight"


 cm-7-20130503-UNOFFICIAL-brandy

- Fix proximity sensor and black screen after call (no need Proximity Screen Off) (@Gulyuk)
 proximity

52 comments:

  1. Thank you very much Guyluk and Shkerzy!

    ReplyDelete
  2. very good work Shkerzy. but I need to have installed the 2.7.35 kernel from jingerbread or can be direct from froyo? Do you you could help compile the partition FOTA.img and FOTAFLAG.img from phone?

    ReplyDelete
    Replies
    1. We can't compile this partitions, because it's proprietary TCT - Alcatel and they not publish source code for this.

      Delete
    2. then why gulyuk public in another forum such partitions and with that I changed everything in the signal and lost my signal. But what if you can?. then why only in this forum can not post?

      Delete
    3. what he public at another forum? link

      Delete
    4. yes. you check this link http://4pda.ru/forum/index.php?showtopic=299039&st=3520#entry12721962
      Can you will do?

      Delete
    5. These files were obtained from Alcatel to upgrade Serbian OT990 (for Europe) and therefore they are not suitable for other regions (US).

      Delete
    6. ok Sherzy and friend can you compile a 2.6.35.7 kernel to run on gingerbread for us Americans? Europe is that the different modem works with us and asks for this requirement. from there comes the problem with 3G here in America. our modem is Gulyuk says 60501005 which is the old modem. Can you help? please

      Delete
    7. okay, make downgrade via OTU or flashing FOTA (what metod did workable 3G on froyo and old bootloader?)
      then flash cm7 from this thread and one of this kernel
      1. http://www.mediafire.com/?t7btb9flc5a7p5d
      if first kernel not made cm7 bootable - try second kernel
      2. http://www.mediafire.com/?vug7kddsp43e41p

      Delete
    8. if my version is froyo with old bootloader. but when I update with one touch upgrade I just upgraded to 2.2.2 and not 2.3.4. Can you do something? How OTU is done? or intermittently with FOTA and I did with the method GULYUK and reactivate it I had to take it completely lost the signal.

      Delete
    9. argh... just flash 2.2.2 through OTU then flash via CWM cm7 and kernels, what I writed in previous message, and do not made upgrade by flashing FOTA.
      OTU checking IMEI and region code from phone nvram. Also this method not by Gulyuk - it's repost from xda-developers.com

      Delete
    10. I try and I leave it as froyo. I flashed the kernel via CWM and I upgrades with Alcatel One Touch. Although the procedure did I do? good and you can not change the official 2.3.4 kernel with bootloaders that serves old as mine? or how do I do here in Mexico in order to enjoy gingerbread without losing 3G?

      Delete
    11. and you can not run an official gingerbread kernel 2.6.35.14?

      Delete
    12. - First way to enjoy gingerbread for US region it's official update by Alcatel. (maybe never be)
      - Second way was old bootloader + new kernel without change for load on old bootloader (bootloop when load libaudio)
      - Third way was as second, but with change for load on old bootloader (can't boot kernel)
      - Fourth way make binary change in studypara to another config (eu -> us1)

      Delete
    13. ok friend. and How can I do? one by one successful? and my region is Mexico. Do you think that can be done by the second method or some method?

      Delete
    14. What not affect somewhat the last option? or How can I do a backup of partition studypara?

      Delete
  3. Very good. Is there any software to make the proximity sensor work for this rom?

    ReplyDelete
  4. thanks for all,you're the best ! :)

    ReplyDelete
  5. why auto lock screen stop working ? any solution ?

    ReplyDelete
  6. Установил CyanogenMod 7 20130503 на alcatel ot 990,обнаружил пару проблем,(возможно я чтото не правельно сделал.)
    1.Интернет не работает,галочку поставил на передачи данных а инет всеравно не работает вот скрин.
    2.Установил гаппсы,а их в меню нету.
    Подскажите пожалуйста в чем проблема кто знает

    ReplyDelete
    Replies
    1. http://i031.radikal.ru/1305/f1/8af8466e0cb3.png -тут скрин

      Delete
    2. resolve - http://4pda.ru/forum/index.php?s=&showtopic=299039&view=findpost&p=21949358

      Delete
  7. How to enable auto brightness in CyanMobileX?

    ReplyDelete
  8. What size /custpack and /system partition you have?

    ReplyDelete
  9. you plan to make it compatible with the 908, as the 0205 version?

    in the previous worked fine with my 908 but never could install the gapps, to fix this in the current version?

    thanks in advance and sorry for my English google translator xD

    ReplyDelete
  10. Well, we have /system - 95 mb and /custpack - 115 mb
    and made simple - for cm7 copy to /custpack app and fonts folder, then make symlink /custpack/app -> /system/app ;
    /custpack/fonts -> /system/fonts
    But this trick cann't be made on official ROM by Alcatel/JRD and all based on it, because he did hardlinks for some files in /custpack (e.g. /custpack/media/audio)

    ReplyDelete
  11. only for 990, 993 is a different model

    ReplyDelete
  12. this rom has greek language and cm7 not have google apps by default

    ReplyDelete
  13. link for gapps:
    http://www.4shared.com/zip/Pazh1G4D/gapps-gb-20110828-repack.html

    ReplyDelete
  14. ok, I installed CM7 ROM, using the patch to 908 of the LewaOS, change the boot animation to the lewaOS, so other works perfectly ... with the exception of two things:

    1 - can not find the mobile phone operator, does not reach the screen to enter the PIN (before applying the patch, if I did)

    2 - same as above, I could not install the gapps ...
    think. simply installing the graphics of the 908 drivers from the recovery might work well ... but not to find them to try ...

    anyone know where to get them?

    ReplyDelete
  15. how can we get correct battery temperature in this Rom. is there any possibilty or specific software ?

    ReplyDelete
  16. can i use this proximity upgrade on cyan ex?

    ReplyDelete
  17. Please port firefox os for ot990.

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
  18. Replies
    1. oh i c. whats innovative in firefox OS ? why u looking for it in ot 990 ?

      Delete
    2. 1: HTML5 applications can run on this platform.
      2:In Firefox OS, only browser engine runs above the kernel and device drivers and all apps are executed by that browser engine. Think this way. You have an OS which runs only a browser engine and that browser engine runs all the apps
      3:Firefox OS devices have much longer battery life because of less resource consumption.
      4:You are not forced to download apps from Mozilla’s market place. You can add any web app on the internet as native app.
      5:

      Delete
  19. My proximity sensor doesn't work. When i try to call someone screen goes black but i hear everything, only solution is to take out battery,can someone help!!

    ReplyDelete
  20. my prximity doesnt work,screen stays black after call,what to do?

    ReplyDelete
  21. This looks like a great rom but I keep getting an error message (when I have a sim card in)

    the process com.android.phone has stopped running.
    Force close

    The message pops up every 3 or 4 seconds after I close it so I can't change network settings - it exits the menu I need to use when the error message pops up.
    I tried the solutions at http://productforums.google.com/forum/#!msg/mobile/WMeRPJuEQJc/5GY2I76hhjI but when the error message pops up my phone won't stay in the menu I need.

    I hope I can get it sorted out. This rom has some really great features.

    ReplyDelete
  22. rom is the best, only problem is proximity, screen goes black and i can't turn it on. I need to take out battery after every call...help!!

    ReplyDelete
    Replies
    1. Have you applied the patch linked at the top of this page Valentin ?

      Delete
  23. i have also problem with proximity and i have flashed proximity.zip,but still doesn´t work,after that i installed proximity screen off and this not solved problem.plz solve this problem with proximity,this is best rom.

    ReplyDelete
  24. I don't see any recent comments on here from the developers, I'm starting to think this site is not being maintained anymore.
    Gulyuk took offence to comments made in the CyanogenMod 9 thread, maybe he's not coming back ?
    It was good while it lasted.

    ReplyDelete
  25. I don't know what's problem with proximity by your, but users on 4pda.ru and androidsrbija.com forum does not have this problem.. Also, screen will not turn on automatically if phone call is more than "Screen timeout" time (1 min by default), but you can turn it on by pressing Home or Power button.
    Second, proximity sensor turn on/off screen by default only in vertical orientation .. in "Call settings" you can check "Always use proximity" but I don't use this option.
    Also make this test: make Phone call, did vertical orientation and close/open proximity sensor by finger in short time - screen must disable/enable.

    ReplyDelete
  26. I have disabled proximity for call, and installed "shake awake" but still screen turn's off. And like i said only solution is taking out battery...shake awake keeps screen awake while calling, but doesn't work for me

    ReplyDelete
  27. You should install rom and proximity again and do wipe data/factory reset.It will be fixed

    ReplyDelete
  28. Does anybody know if Portable WiFi HotSpot works on this ROM?

    ReplyDelete
  29. 3G, wifi, hotsport wifi, and GSM works with this version?

    ReplyDelete
  30. @Faisal Nazir give me little help here i should go back into recovery? clear everything flash Rom and then proximity.zip and then Reboot problem is there is not battery symbol it shows sync symbol! ans proximity still doesn't work

    agar thori help ho jai tou phir shayad kam ho jai thanks

    ReplyDelete
  31. Are there any news??? new rom or anything else

    ReplyDelete