- Camera make normall photo/video
- Working FM (@tuxtard)
- Enable routing audio to BT headset
- Add correct MMS profile
- Autobrightness is work:
-- Autobrightness work only when enable "Light sensor filter" and "Allow light decrease" in "CyanogenMod settings" - "Display" - "Automatic backlight"
cm-7-20130503-UNOFFICIAL-brandy
- Fix proximity sensor and black screen after call (no need Proximity Screen Off) (@Gulyuk)
proximity
Thank you very much Guyluk and Shkerzy!
ReplyDeletevery good work Shkerzy. but I need to have installed the 2.7.35 kernel from jingerbread or can be direct from froyo? Do you you could help compile the partition FOTA.img and FOTAFLAG.img from phone?
ReplyDeleteWe can't compile this partitions, because it's proprietary TCT - Alcatel and they not publish source code for this.
Deletethen why gulyuk public in another forum such partitions and with that I changed everything in the signal and lost my signal. But what if you can?. then why only in this forum can not post?
Deletewhat he public at another forum? link
Deleteyes. you check this link http://4pda.ru/forum/index.php?showtopic=299039&st=3520#entry12721962
DeleteCan you will do?
These files were obtained from Alcatel to upgrade Serbian OT990 (for Europe) and therefore they are not suitable for other regions (US).
Deleteok Sherzy and friend can you compile a 2.6.35.7 kernel to run on gingerbread for us Americans? Europe is that the different modem works with us and asks for this requirement. from there comes the problem with 3G here in America. our modem is Gulyuk says 60501005 which is the old modem. Can you help? please
Deleteokay, make downgrade via OTU or flashing FOTA (what metod did workable 3G on froyo and old bootloader?)
Deletethen flash cm7 from this thread and one of this kernel
1. http://www.mediafire.com/?t7btb9flc5a7p5d
if first kernel not made cm7 bootable - try second kernel
2. http://www.mediafire.com/?vug7kddsp43e41p
if my version is froyo with old bootloader. but when I update with one touch upgrade I just upgraded to 2.2.2 and not 2.3.4. Can you do something? How OTU is done? or intermittently with FOTA and I did with the method GULYUK and reactivate it I had to take it completely lost the signal.
Deleteargh... just flash 2.2.2 through OTU then flash via CWM cm7 and kernels, what I writed in previous message, and do not made upgrade by flashing FOTA.
DeleteOTU checking IMEI and region code from phone nvram. Also this method not by Gulyuk - it's repost from xda-developers.com
I try and I leave it as froyo. I flashed the kernel via CWM and I upgrades with Alcatel One Touch. Although the procedure did I do? good and you can not change the official 2.3.4 kernel with bootloaders that serves old as mine? or how do I do here in Mexico in order to enjoy gingerbread without losing 3G?
Deleteand you can not run an official gingerbread kernel 2.6.35.14?
Delete- First way to enjoy gingerbread for US region it's official update by Alcatel. (maybe never be)
Delete- Second way was old bootloader + new kernel without change for load on old bootloader (bootloop when load libaudio)
- Third way was as second, but with change for load on old bootloader (can't boot kernel)
- Fourth way make binary change in studypara to another config (eu -> us1)
ok friend. and How can I do? one by one successful? and my region is Mexico. Do you think that can be done by the second method or some method?
DeleteWhat not affect somewhat the last option? or How can I do a backup of partition studypara?
DeleteVery good. Is there any software to make the proximity sensor work for this rom?
ReplyDeleteProximityScreenOff
Deletethanks for all,you're the best ! :)
ReplyDeletewhy auto lock screen stop working ? any solution ?
ReplyDeleteУстановил CyanogenMod 7 20130503 на alcatel ot 990,обнаружил пару проблем,(возможно я чтото не правельно сделал.)
ReplyDelete1.Интернет не работает,галочку поставил на передачи данных а инет всеравно не работает вот скрин.
2.Установил гаппсы,а их в меню нету.
Подскажите пожалуйста в чем проблема кто знает
http://i031.radikal.ru/1305/f1/8af8466e0cb3.png -тут скрин
Deleteresolve - http://4pda.ru/forum/index.php?s=&showtopic=299039&view=findpost&p=21949358
DeleteHow to enable auto brightness in CyanMobileX?
ReplyDeleteWhat size /custpack and /system partition you have?
ReplyDeleteyou plan to make it compatible with the 908, as the 0205 version?
ReplyDeletein the previous worked fine with my 908 but never could install the gapps, to fix this in the current version?
thanks in advance and sorry for my English google translator xD
Well, we have /system - 95 mb and /custpack - 115 mb
ReplyDeleteand made simple - for cm7 copy to /custpack app and fonts folder, then make symlink /custpack/app -> /system/app ;
/custpack/fonts -> /system/fonts
But this trick cann't be made on official ROM by Alcatel/JRD and all based on it, because he did hardlinks for some files in /custpack (e.g. /custpack/media/audio)
only for 990, 993 is a different model
ReplyDeletethis rom has greek language and cm7 not have google apps by default
ReplyDeletelink for gapps:
ReplyDeletehttp://www.4shared.com/zip/Pazh1G4D/gapps-gb-20110828-repack.html
ok, I installed CM7 ROM, using the patch to 908 of the LewaOS, change the boot animation to the lewaOS, so other works perfectly ... with the exception of two things:
ReplyDelete1 - can not find the mobile phone operator, does not reach the screen to enter the PIN (before applying the patch, if I did)
2 - same as above, I could not install the gapps ...
think. simply installing the graphics of the 908 drivers from the recovery might work well ... but not to find them to try ...
anyone know where to get them?
how can we get correct battery temperature in this Rom. is there any possibilty or specific software ?
ReplyDeletecan i use this proximity upgrade on cyan ex?
ReplyDeletePlease port firefox os for ot990.
ReplyDeleteThis comment has been removed by the author.
Deletefirefox os no browser :>
ReplyDeleteoh i c. whats innovative in firefox OS ? why u looking for it in ot 990 ?
Delete1: HTML5 applications can run on this platform.
Delete2:In Firefox OS, only browser engine runs above the kernel and device drivers and all apps are executed by that browser engine. Think this way. You have an OS which runs only a browser engine and that browser engine runs all the apps
3:Firefox OS devices have much longer battery life because of less resource consumption.
4:You are not forced to download apps from Mozilla’s market place. You can add any web app on the internet as native app.
5:
My proximity sensor doesn't work. When i try to call someone screen goes black but i hear everything, only solution is to take out battery,can someone help!!
ReplyDeletemy prximity doesnt work,screen stays black after call,what to do?
ReplyDeleteThis looks like a great rom but I keep getting an error message (when I have a sim card in)
ReplyDeletethe process com.android.phone has stopped running.
Force close
The message pops up every 3 or 4 seconds after I close it so I can't change network settings - it exits the menu I need to use when the error message pops up.
I tried the solutions at http://productforums.google.com/forum/#!msg/mobile/WMeRPJuEQJc/5GY2I76hhjI but when the error message pops up my phone won't stay in the menu I need.
I hope I can get it sorted out. This rom has some really great features.
rom is the best, only problem is proximity, screen goes black and i can't turn it on. I need to take out battery after every call...help!!
ReplyDeleteHave you applied the patch linked at the top of this page Valentin ?
Deletei have also problem with proximity and i have flashed proximity.zip,but still doesn´t work,after that i installed proximity screen off and this not solved problem.plz solve this problem with proximity,this is best rom.
ReplyDeleteI don't see any recent comments on here from the developers, I'm starting to think this site is not being maintained anymore.
ReplyDeleteGulyuk took offence to comments made in the CyanogenMod 9 thread, maybe he's not coming back ?
It was good while it lasted.
I don't know what's problem with proximity by your, but users on 4pda.ru and androidsrbija.com forum does not have this problem.. Also, screen will not turn on automatically if phone call is more than "Screen timeout" time (1 min by default), but you can turn it on by pressing Home or Power button.
ReplyDeleteSecond, proximity sensor turn on/off screen by default only in vertical orientation .. in "Call settings" you can check "Always use proximity" but I don't use this option.
Also make this test: make Phone call, did vertical orientation and close/open proximity sensor by finger in short time - screen must disable/enable.
I have disabled proximity for call, and installed "shake awake" but still screen turn's off. And like i said only solution is taking out battery...shake awake keeps screen awake while calling, but doesn't work for me
ReplyDeleteYou should install rom and proximity again and do wipe data/factory reset.It will be fixed
ReplyDeleteDoes anybody know if Portable WiFi HotSpot works on this ROM?
ReplyDelete3G, wifi, hotsport wifi, and GSM works with this version?
ReplyDelete@Faisal Nazir give me little help here i should go back into recovery? clear everything flash Rom and then proximity.zip and then Reboot problem is there is not battery symbol it shows sync symbol! ans proximity still doesn't work
ReplyDeleteagar thori help ho jai tou phir shayad kam ho jai thanks
Are there any news??? new rom or anything else
ReplyDelete