Wednesday, September 12, 2012

Extreme Kernel #2

The very quick and very fast kernel was compiled from experimental developments with many tweaks, you can try it ;)
Russian users said that it have good sleep when tested

Extreme kernel #2

57 comments:

  1. Please edit this with voltage control ! :)

    ReplyDelete
    Replies
    1. If you such a brainy,do it yourself,plz.

      I'm not a fairy to fulfill the whim;)

      Delete
    2. You're best developer for this phone but...Ok

      Then we have to wait Cyanogen Mod :P

      Delete
  2. what is changed and added to this kerner? works great on Telenor 2.3.4 HU Rom

    ReplyDelete
  3. Replies
    1. Yes,i have that problem too...but i flash Extreme kernel 1 and it works :D

      Delete
    2. Yesterday I flash the v5h6-mod + extreme kernel 2. After the first boot the phone saw the SD card,and works. I install the Link2SD, reboot the phone and the card is gone, the phone didn't seen. 2-3 reboot, take out the sd card, but nothing happen. I put back my backup.

      Delete
  4. Same thing,no sd card after flashing this kernel?

    ReplyDelete
  5. it is work with qme 2.0 rom?

    sorry for my english

    ReplyDelete
  6. yesterday i tried to go on clockwork mode recovery via the buttons at the boot of the phone.Accidentally i released the home button too early and as i read in other posts a hardset was performed and wipe all my user data on the phone...After that,when i open my phone it shows the android logo and then it freezes showing me a black screen...i tried to connect it to my computer but it can not be recognised from the pc...
    Is there any way to fix it myself or i have to go to a repair centre?
    Thanks...

    ReplyDelete
    Replies
    1. Look i think the problem can be sloved with downgrading to 2.2 Telenor Serbia Stock Rom ( I have just that one) and i can give you link to downgrade it but on your own risk of course.

      http://www.4shared.com/rar/qu7Yk36D/Telenor_HU_234_na_Telenor_SR_2.html

      Get into fastboot holding volume down ( - ) and power button, when phone vibrate leave power button just hold volume down button for 10sec.

      (Make sure you have alcatel drivers before that)

      Unpack this file and connect phone with PC and double click on downgrade..
      Wait sometime and phone will shows Telenor Logo or Battery Charging, after taht disconnect phone from PC and turn it on... I think you understand me and i hope i help you :D

      Delete
  7. This comment has been removed by the author.

    ReplyDelete
  8. Nixx i have a problem...i downloaded the the drivers(android manager)but my phone is still can not be recognised by the computer...what i have to do for this???

    ReplyDelete
    Replies
    1. Maybe the problem is in your usb port, try another one ;) (Do you have One Touch Upgrade ? )

      Delete
    2. thanks friend..the problem was with the one touch upgrade or my usb port...aftr that i installed telenor and all works fine...thanks again!!!

      Delete
  9. Guys freezing problem sloved for me !!!

    Now with governor conservative and scheulder vr i can overclock to 900mhz !

    SERGEY you are the best !!!! :D

    ReplyDelete
    Replies
    1. Look Sergey Samsung Galaxy Ace has MSM7227 (or turbo?) CPU like OT990 right ?
      I watch video where some kid overclock it to 1ghz but it heat too much...i don't know is risky to overclock to 1 ghz ?

      Delete
  10. hey sergey can you make a new blog with roms and kernels for alcatel ot 995...take a look at its price and its cpu...amazing!!!

    ReplyDelete
    Replies
    1. Hi, I'm not user of 995,and also I cannot make for this device any things,sorry
      Because for me 990 is very good smartphone and I want to upgrade him (new roms from source code) and Shkerzy work on it too

      Delete
  11. FAT32 partition with ext2 - link2sd bugging with this kernel to

    ReplyDelete
  12. OT upgrade 1.9.9 just hit my country so I finally got official gingerbread. Should I install Marina now or is there a new Marina/2.3 Rom on the way ? ;)

    ReplyDelete
    Replies
    1. 2 days of Marina Lite usage later... the battery drain on this thing is dreadful! >_< I do hope you're working on something new!

      Delete
    2. yes,you right - we work on cm7,later I upload video about this project.
      Only this work's very hard,because cm7 based on AOSP source code, but, our firmware on Code Aurora sources with many sheet by JRD developers!

      We try porting, but we it's two men :D and need help for fix some bugs!

      Delete
    3. Bro we will support you !! :D <3

      Delete
    4. This comment has been removed by the author.

      Delete
  13. SD card not recognized. How to solve this?

    ReplyDelete
  14. Devices much worse than ours are on CM10,and there is no one outhere that wants to help you

    ReplyDelete
  15. When will you upload the video,can't wait to watch it;)

    ReplyDelete
  16. http://forum.xda-developers.com/showthread.php?t=710850

    I'm interesed about compiling kernel and overclocking GPU , but i never do that before but now i will try. As something new i will try to "overclock" GPU. I follow tutorial and i think this should be possible.

    @Gulyuk this is my settings, i think this is some good clock speed ?
    http://imageshack.us/a/img341/3901/dfbne.jpg

    Can you please try to compile kernel with this settins if i get wrong ? :)

    ReplyDelete
  17. haey can anyone answer me please...can i install marina or qme rom from official 2.3.4

    ReplyDelete
  18. We're waiting for CM7 ! Gulyuk when you compile it,you can go into retirement :)

    ReplyDelete
    Replies
    1. I'm sorry bro...can you fix it ?!

      If somebody can buy you some used phone so u can test new roms (cm7...) and some tweaks on it....and i'm really sorry about your phone ! You broke it coz us .... :( Thank you for all ! :)

      Delete
  19. can i try this on EwRa ROM or only on 2.3.4 ?

    ReplyDelete
  20. This comment has been removed by the author.

    ReplyDelete
  21. Nice work I'm using your 0.2H rom and real nice... the only problems I've it's that bluetooth does not activate and dont find either a good flashplayer for it... (the ones for armv6 i've are pretty unstable and uses to hang the browser). For all the rest i'm impressed...VERY NICE JOB: PERFECT KERNEL AND ALMOST PERFECT ROM

    ReplyDelete
  22. I do not think so, because I'm working on AOSP(http://4pda.ru/forum/index.php?showtopic=299039&view=findpost&p=16414971) rom,and next the cm7

    ReplyDelete
    Replies
    1. So you compile CM7 on aurora code ok ,but some things still don't work (i don't know russian language so much so i translate it ) like BT,Wifi,radio....
      Can you give us link to try it ? Before you compile it on AOSP ? :)

      Delete
    2. Plss sergey upload to mediafire so we can download it coz i can't download from 4PDA .... ! :(

      This is the reslt when i click on your attached file on 4pda :
      Ой! Ошибка 404.

      Запрашиваемая информация не существует, перемещена или удалена.


      plsss ! :D
      Для поиска необходимой информации, Вы можете посетить:

      Delete
    3. U should @ first register to download..

      Delete
    4. @Veljko Jbg kad nzm ruski....nmg onaj kod da provalim.....moze pomoc ?

      Can somebody help me about that verify code in 4pda logining ?!

      Gulyuk ?

      Delete
  23. Im using google translate plugin for firefox and i know a bit off Russian too.. :) Try that way..

    ReplyDelete
    Replies
    1. But i want to download CM7 from code aurora what sergey compile !!
      But i can't register coz i can't finish the verify code ! (4pda)
      Sergey you spent much more time on 4pda, please can you just share CM7 aurora so we can test it ! ??

      Delete
    2. Builds on code aurora is not CM7.

      Delete
  24. whatever....so can you give us the link of aurora rom uploaded on mediafire to try it?

    ReplyDelete
    Replies
    1. this kernel can install by cwm on install zip from sd card? i have the jelly bean rom on 2.3.4, works? sorry for my english xD

      Delete
  25. this kernel can install by cwm on install zip from sd card? i have the jelly bean rom on 2.3.4, works? sorry for my english xD

    ReplyDelete
    Replies
    1. Yes you install via cwm . install zip from sd card/choose zip from sd card

      Delete