Tuesday, May 22, 2012

EWRA 0.2 (H)


Kernel:
  • supported new I/O scheduler BFQ (as default)
  • max freq 787 MHz
  • remove freq 729,768 (no active frequency)
Firmware:
  • Fastboot in Power Menu
  • fix bugs for BT and Wi Fi
  • Add new language pack Hungarian
  • Some fixes in the system

Install EWRA ROM available via Recovery as update.zip

Download:  ewra_0.2(h) and kernel with max req 825 Mhz available at here (also as update.zip)!



Warning: I forgot to say that after applied odexed script the Root Explorer stops working!
Later, I'll correct it or you can pre-install another File Manager (+root) then odexed rom



If you wish to enjoy the music and using the EQ control, try this player (TTPOD free music player)


133 comments:

  1. Hey thanks again Sergey , you are realy amazing and you are doing a great job.

    I have just one question , are we going to loose data like contacts , sms .... if we install this update from recovery ?

    ReplyDelete
    Replies
    1. Yes,but you can use the 3rd party apps as:
      Backup to Gmail,SMS bacup + and other
      Then flash it ;)

      Delete
  2. Is there any way that you send me files wich should be translated for language packs , i would like to try translate it on Serbian language ?

    ReplyDelete
    Replies
    1. Is this language added in the official firmware for your region?If yes,you must send me backup this rom

      Delete
    2. I sent it to you, when I was asking for a fix to downgrade from 2.3 to Telenor Serbia 2.2
      Maybe that would help you.
      Tnx a lot.
      Best regards and respect for your awesome work.

      Delete
  3. We have the Telenor firmware with Serbian language on Froyo 2.2 if you mean on this , just i dont know how to do backup of whole rom so i can send it to you. Please tell me what i need to do and sure i will do it and send it to you?

    ReplyDelete
  4. I think i know how to do it , from recovery right ?

    ReplyDelete
  5. hello i install this rom but i cant connect on internet data enable dont work,can u fix that

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
  6. Ok Sergey here is the original serbian rom http://www.4shared.com/rar/KqZ1lsqq/Telenor_OneTouch_990_original.html

    I hope you can add Serbian language in Ewra

    Thanks.

    ReplyDelete
    Replies
    1. Yes,I found that all files need for it ;) wait some time

      Delete
  7. thanks for your awesome job,please compile kernel to 825!thanks in advance!

    ReplyDelete
  8. another vote for kernel with 825mhz , keep up the good work.

    ReplyDelete
  9. Gulyuk, can i install this rom via recovery on original 2.2 rooted + cwm recovery rom, or first i have to install the (first) ewra 0.2 rom?

    ReplyDelete
  10. This is the full rom so you should be able to install it without installing ewra 0.2 first.

    ReplyDelete
  11. Thank U very much)

    We're expected this to

    ReplyDelete
  12. Great job Sergey, thanks for the hard work and support!

    ReplyDelete
  13. Sergey,

    Does this ROM has the stock Phone.apk or the one what Alcatel's customized?

    Regards,

    ReplyDelete
    Replies
    1. What? Sorry,I don't understand that you mean
      Are this ROM will work with stock apps from Alcatel?It's you mean or not?My Eng is bad:(

      Delete
    2. Давай я переведу,он спрашивает у этой прошивки стоковая звонилка или нет)

      Delete
    3. Вот что значит прогулять пару пар английского =D
      Yes,it's the stock Phone.apk

      Delete
  14. my phone is running version 2.3.4, when I try to install 2.2.2 rom ewra test my phone not start. How do I put my phone on to my versions 2.2.2 rom installed ewra.
    ewra! you can make a rom version 2.3 ewra to us?

    ReplyDelete
    Replies
    1. Nike, you must downgrade from 2.3.4 to 2.2.2 first.
      Then you can flash Ewra to your phone.

      Downgrade post by Qltsar: http://forum.xda-developers.com/showpost.php?p=25086355&postcount=556

      Delete
  15. Replies
    1. how it is necessary to withdraw it the pulldown bar background animation?

      Delete
    2. you have want to change it?

      Delete
    3. yes , how can to modify onto a black background

      Delete
  16. The kernel OC with max freq 864 Mhz also stable as 825 (not lags,crashes and normal temperature),until I'm test...

    ReplyDelete
  17. I have no "install" file on o.2H,can i install it on my rooted phone via cwm?

    ReplyDelete
    Replies
    1. Put this archive on sdcard and not extract,then load into recovery and install as zip from sdcard

      Delete
  18. nice job ... i will try it now but after that .. i will put the arabic language in it and i'll upload it if any one else want the arabic
    thanks >>> great job but how can the max speed of the processor is 900 !!!
    and if it is 900 why the vendors doesn't make the mobiles run with it ..is it dangerous on the mobile ?

    ReplyDelete
  19. 825Mhz works fast and stable i think that cpu can go even higher , the same cpu with default 600mhz is factory overclocked to 800 mhz and placed in some other mobile phones , keep trying to find max frequency that cpu can handle.

    ReplyDelete
  20. I want to test MAX freq 825 MHz,but how can i go back to 787 MHz without reinstalling ewra 0.2(H)

    ReplyDelete
    Replies
    1. change boot.img into archive with freq 825 to boot.img 787 from ewra 0.2 h and flash

      Delete
    2. in archive ewra 0.2(h) - boot.img with freq 787 put it in archive with max freq 825

      Delete
    3. i set the freq of the cpu with antutu cpu master pro ... it's great and it has a very useful widget for immediately controlling

      this is the CWM flashable Arabic support
      http://www.mediafire.com/?97fd4jj899fl3xk

      Delete
    4. This comment has been removed by the author.

      Delete
    5. In next update with integrate serbian language I'll add it support of Arabic...

      Delete
  21. yes, in any processor have max freq, but many vendors not set it - it's the safety precautions for reducing the lifetime...and OC it's own risk

    ReplyDelete
  22. Is the rom i atached here any helpful for making ewra with serbian language ?

    ReplyDelete
    Replies
    1. yes, I wrote that found all files for integrate Serbian language in ewra

      Delete
  23. Can you try with 900 mhz? and if it is fine,can you upload it? thanks...

    ReplyDelete
    Replies
    1. I find the way to use rootexplorer,it's too easy,we must delite it from custpack and then install as usualy app(in data)and it will be great

      Delete
    2. That's right, and then you can safely applied the odexed script

      Delete
  24. 900 Mhz - I do not want to risk,sorry

    ReplyDelete
  25. Following you from the begining of ot-990 rom development, and i must say - great work. I just want to ask if it is possible to compile kernel with cifs support (i don't know if there is an option or support by the kernel for compiling cifs module)can you enable it for the next release.

    ReplyDelete
    Replies
    1. I'll think about it,impossible is not

      Delete
    2. Can you write the HOW-TO use this module CIFS for sharing?
      Yes,I can compile kernel with support CIFS

      Delete
    3. Sorry for delayed reply.
      To mount shared folder with this module you can:
      1) write commands directly to terminal (load module, mount shared folder, umount)
      2.1) create script to simplify the mounting proces(you can use gscript to execute the script ), for example:
      #insmod /system/lib/modules/cifs.ko
      #busybox mount -t cifs //192.168.1.2/Share /sdcard/Samba -o username=guest
      /* Usage:
      mount -t cifs /// / -o username=,password=
      */
      2.2) script for umounting samba share
      #busybox umount /sdcard/Samba
      3) Using cifsmanager (https://play.google.com/store/apps/details?id=ws.plattner.cifsmanager)

      Delete
    4. I'm sorry, but I have never used it,and yesterday I has worked with CIFS Manager and this is understand.
      But I did not understand how to create a sharing folder for it in Win 7 :(
      Can you help me?

      Delete
    5. Let's say you want to share folder Music. Right click on that folder, select Properties > Sharing > Advanced Sharing > Share this folder.
      Then you can use address to that folder to mount it, for example: 192.168.1.4/Music

      Delete
  26. can you tell me how to install update for 825mhz?I install update 0.2h from CWM then normal enter in system,work all ok...then what?

    ReplyDelete
  27. For installing 825Mhz update use the same procedure you used for installing 0.2h

    ReplyDelete
  28. Great work Gulyuk, thanks!
    I find only 2 problem:
    - the ttsservice dont work, and i dont find the .apk in the system or the cuspack - i have the 2.3.4 ttsservice but isnt work on 2.2, if somebody send me, i appreciate it
    - the original videocamcorder crash all the time - but i install the latest lgcamera pro and its work fine.

    ReplyDelete
    Replies
    1. "original video camcorder" is crash? but have never seen this bug

      Delete
    2. Here is TTSservice.apk from original 2.2 Telenor rom.
      http://www.4shared.com/android/_rCv7-Ez/TtsService.html?

      Delete
    3. Sorry, I dont no why or how, but yesterday crash all the time.
      Now working good. wtf?
      It is poosible that yesterday when i try the cpu was in 600 mhz (setcpu) but now 787 mhz? I think there is no connection.

      tititj thank the .apk whit this and the pico tts works great the svox. ;)

      Delete
  29. i find one problem but i solved it
    1- "Preparing SD card; Checking for errors" it takes along long time , but i solve it by deleting "fsck_msdos" from "system/bin" .. and now it is very great .. thanks alot

    ReplyDelete
    Replies
    1. Yes,if sdcard have big size and more files,the check will be go long time

      Delete
  30. gulyuk, подскажи пожалуйста, как применить odexed script на ewra 0.2h?

    ReplyDelete
    Replies
    1. Сначала сделай так,чтоб Root Explorer установился в /data/app,то есть зайди в /custpack/app и там нажми на RootExplorer.apk,установи его,согласившись с заменой данных и потом загрузись в рекавери и прошей этот odexed.zip скрипт как обычно

      Delete
    2. А где взять этот odexed.zip?

      Delete
    3. В разделе Download или в архиве блога

      Delete
  31. Hi Sergey , just to ask you when you work on aplying Serbian language dont integrate it on 825Mhz , on androidserbia.com forum many ppl cant start it on their phone and some can , it is something with hardware also , examp my phone works well on 825 but i instaled also on another phone and that phone cannot start.

    ReplyDelete
    Replies
    1. until I didn't start the integrate...
      sorry,but I wrote how who want the kernel with stock max freq must do
      and it is not my problem,if the kernel with max freq (not stock values) will be in the firmware with integrated Serbian language
      I'm working if I have my desire, else I stop the work

      Delete
  32. You do what you thing its best, everybody wants 100% working max overclock version, which is 0.2, aka the begining of ewra project.. So, do as mouch as you can, leave this comments behind. It's just your hobi ..

    ReplyDelete
  33. Thanks for your work man :)

    I have a problem switching from marina rom to ewra. Did a ful wipe from cwm then installed zip via "chose zip from sd". After the restart it just hangs with black screen.

    Any suggestions

    ReplyDelete
    Replies
    1. maybe for begin you must downgrade from 2.3 to 2.2?

      Delete
  34. Will do, is this mandatory or? I was afraid to go straight from froyo to ewra 'cause it was necessary to install stock 2.3.4 if you wanted to install marina rom.

    Thanks for reply

    ReplyDelete
  35. Sergey can i go directly from 0.1 to 0.2H?

    Just install 0.2H from sd card on 0.1?

    ReplyDelete
  36. NikolaCCCC, yes,just flash it via recovery from sdcard

    ReplyDelete
  37. gulyuk, подскажи пожалуйста, как обновить Holo Launcher?
    Поверх не ставится, а удалить и поставить новую версию нельзя, поскольку это единственный лончер.
    Вариант преобразования в пользовательское приложение не прошёл. Преобразование происходит, приложение перебрасывается в /data/app, но при попытке установки поверх, всё равно пишет, что приложение системное и не устанавливается.
    Как быть? Помоги.

    ReplyDelete
    Replies
    1. хм...станно,но у меня поверх того что в /custpack/app поставился в /data/app как обычно,ты не модификацию ставишь?если не выходит,используй сторонний еще какой-нибудь типа Zeam,переключись на него и удали отовсюду Holo,затем ставь

      Delete
  38. Can you integrate flash player with this rom?This rom works much better than the stock rom,thank you for your work!

    ReplyDelete
    Replies
    1. I think about it later if will be found the working port

      Delete
  39. Can you tell me,is there any chance to build update.zip for 800mhz max?Like a update for 825 mhz...thanks

    ReplyDelete
    Replies
    1. maybe, but you can write line code in script of init.d and set the max freq for you:
      echo "806400" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq

      Delete
    2. ok,can i do this with root expl or something else?thnks

      Delete
  40. the best rom currently for this phone, one suggestion or maybe two include serbian language in next, and please fix camera, i remember that it was possible to change driver on sony ericsson k800 etc... thank you for everything.. :)

    ReplyDelete
    Replies
    1. fix camera,but what should I correct there?
      sorry,I didn't works at this Rom now and it is not the platform S40,I remember that modify driver cam for my k550i too

      Delete
    2. well belive it or not, i now tried to use camera, and boom, it bagged and phone restarted...maybe it's because of OC.. but i keep it on 787.. when i entered camcoder i don't get picture it was black, with some lines (white), like tv when no signal something like that..
      and bi fixing i didn't mention this, i was thinking of poor camera performace, when recording, and sometimes when taking picture...

      Delete
    3. The main camera works but the frontal camera doesn't. No videoconference on ewra 0.2H ROM :(

      Delete
  41. Everything works flawlessly on my side. I currently use 878 kernel, and I experienced no error at all. Great job Sergey.

    @mijalko:
    Correct me if I'm wrong but this is the only custom 2.2.2 based rom that exists for this phone (unless you count sebastian rom which was abandoned).

    ReplyDelete
    Replies
    1. 878 mhz?HOW?Corect me if my wrong?!

      Delete
    2. but sebastian custom rom's based on stock firmware,trust me,his rom was not compile from aosp source code and of course he did not modify the kernel

      hmm...Have you never compared this firmware? stock,sebastian and my?That they are similar?

      I'm third day use the kernel with max freq 864 and this is very well :P

      Maybe who had crashes on OC kernel have the model - alcatel ot 990A?

      Delete
    3. how can i put line in script for 800mhz?Script manager or root explorer?Can you help little more,thanks...Under battery on my phone write this ONE TOUCH 990...TCT MOBILE LIITED...BLUETOOTH QD etc....990X-2DTNRS3-S40

      Delete
  42. You can edit lines with any kind of root explorers and text editors.

    ReplyDelete
    Replies
    1. yes,but when i edit line in scaling_max_freq and press save,editor back up old line...

      Delete
  43. Where he make that backup , what kind of backup , write here what you get after editing the line or try to set editor to dont make backups or just delete the backup.I will try to change the line later when i come home from work and i will let you know.Btw i am using es file explorer.

    ReplyDelete
  44. Can you upload kernel with 864mhz as update for people who like to experiment. Tnx in advance.

    ReplyDelete
  45. On my phone the bluetoot, the data and the display rotation works hectic. When I reboot my phone thhey are work correct baut about 2-3 hours later they cant turn on. When I reboot with wifi on then they arent works, when I reboot without wifi work correct a few hours.

    ReplyDelete
  46. I install ewra_0.2(h) and the phone crash after 3 minutes of using and reboot!
    also i try install update kernel and phone dont boot after logo!!
    one more thing when i fastboot ewra_0.2 the phone also dont boot!!
    phone has original 2.2 telenor rom

    ReplyDelete
  47. use the official firmware and be happy;)

    ReplyDelete
  48. Hi Gulyuk
    Loving your ROM it's really fast. I have one problem though - i can't activate other keyboard (I tried TouchPal).

    ReplyDelete
    Replies
    1. Works fine after restart, sorry for the nagging :)

      Delete
  49. Try to copy .apk in custpack and install as system app , i am using touchpal and only way i found to use it is this.

    ReplyDelete
  50. Hi again :)

    Dunno if this gonna be useful, but any feedback is good feedback :D
    I surfed forums tonight, and I found out that some other phones with custom roms similar to this, had frequency issues which involved freeze/restart, but it turned out that problem was related with low sdcard speed which messed up dalvik transfer/usage.

    It's not likely, but maybe that can be the same problem some ppl are having with Ewra here...what do you think?

    Beside that, wanted to let you know that I'm running 0.2h with max freq for 2 days now, with no problems of any kind(fixed connectivity issue with mctweaker, didn't check for BT issues). Now gonna try and see how rom behaves when apps like ATK and JuiceDefender are used, gonna aim for long battery life.

    Cheers m8, keep up the good work o/

    ReplyDelete
  51. This comment has been removed by the author.

    ReplyDelete
  52. Is there a way to uninstall preinstalled system apps on this ROM? Root Uninstaller can't do it.

    ReplyDelete
  53. Use the Root Explore for remove this apps from /custpack/app

    ReplyDelete
    Replies
    1. Thanx for the reply :)
      Is the development still ongoing or have you stopped at 0.2(H)?

      Delete
    2. what should I continue to develop as example??

      Delete
  54. Hi Sergey. Can you tell me what is dalvik heap size on ewra 0.2h 48m 04 64m because i found in build.prop says 48m but in your script says 64m ?

    Thanks.

    ReplyDelete
  55. I think further discussion on the ROM should take place in a forum.
    Blogspot's (albeit threaded) comments are entirely inappropriate for it imo.

    Either create a separate thread in XDA or host one :)
    P.S Thanks for a kickass rom :) Today I clocked a 2 day 15 hour uptime!

    ReplyDelete
    Replies
    1. Yes,if you want you can createthe new topic on xda about this ROM. I do not mind

      Delete
  56. Sergey,

    Would you so kind to build/upload a version of EWRA 0.2(H) without the UI modifications please? I would like to get rid of the ICS theme. Or shall I recompile the ui resources using UOT kitchen?
    Thanks for your answer in advance,

    R.

    ReplyDelete
    Replies
    1. Sorry,but the firmware without ui modification is lost:( though, if you only need a overclock, I can the upload this kernel(only)
      UOT kitchen can not modify all that is necessary apk

      Delete
    2. Hi Sergey,

      Would you so kind to upload the OC kernel only please? Then I'll flash the boot partition only. Thanks in advance!

      Delete
  57. I have ot990 2.3.4 marina...i want to flash ewra0.2.....pls help tanks in advance....or can you make ewra for 2.3.4...so we dont need to downgrade...tnks sir...,:)

    ReplyDelete
  58. I have ot990 2.3.4 marina...i want to flash ewra0.2.....pls help tanks in advance....or can you make ewra for 2.3.4...so we dont need to downgrade...tnks sir...,:)

    ReplyDelete
  59. I noticed that with this rom and any custom rom , my 3g doesnt work anymore . i have found a 3gfix file but no one has it in update.zip . anyone else have no 3g?

    ReplyDelete
  60. can you please make this super rom in
    Spanish .... would be great
    porfavooorrr....

    ReplyDelete
  61. Excelent work, but my bluetooth still doesnt work...any help?

    ReplyDelete
  62. I have a problem with the rom 825MHz kernel ewra 2h sometimes I blanket the screen and I restart the phone Please help me with this

    ReplyDelete
  63. bluetooth not working, any ideas?

    ReplyDelete
  64. doesnt work live wallpaper and Svox Classic TTS voice
    can you help me?

    ReplyDelete
  65. Support in Mexico (baseband) bugs: 3g, bluethot, wifi and camera. thanks EWRA 0.2(h)

    ReplyDelete
  66. WOw it's very good this room thanks! would be nice to support the Spanish language, greetings from México!!

    ReplyDelete
  67. Great ROM, the only problem I have is that I need to reboot my phone every time to make it work

    ReplyDelete
  68. tengo un ot 990 2.3 es posible ponerle el extreme kernel que he estado leyendo a mi cel? sería feliz ya que lo máximo en 2.3 es 725 mhz algo así, ayuda por favor

    ReplyDelete
  69. Yay! Successfully flashed it on my phone! Very big thank you! :)))

    ReplyDelete